1977Ford F250 4x4 460 4 speed

1977 Ford F250 4x4.  It features all of it's original paint on a 99.9% rustfree body from central California.  This is a factory black truck with black interior.  The less than stellar original 351 was replaced with a rebuilt 460, that has 40k miles on it.  The 460 swap is very common in these trucks and is a direct bolt in.  It was done correctly, even using correct truck exhaust manifolds,  This 4x4 also has the desirable 4 speed.  The clutch works nice but the through-out bearing is noisy.  Other options include factory A/C, power steering, the disc brakes, and dual fuel tanks.  It also has the cool bedside toolbox.  It has 4.10 axles, with a limited slip "posi" rear.  The 4x4 system works perfect through the bullet proof NP205 transfercase.   The tires are ok 305/70/16s on nice bullet hole Alloys.  It also has the factory 1 ton over load springs on the rear.  The interior is nice, uncut, and original.  The seat is even nice still, and sits nice and firm.  The only thing not stock in the interior, is a nice sounding AM/FM/Cassette radio. 

I call it 99.9% rustfree because it has some rust in the floors and one spot in the outer door skin of the drivers door.  Other than that is is nice and rustfree form central California.  The rest of the body has is battle scares, but isn't bad for being 45 years old.  The beauty of original paint is that you know exactly what you are getting.  If it was me, I would keep the body waxed and leave it all original, and enjoy it.

It is hard to beat this combination of rustfree original paint survivor 1977 F250 in black, with a 460, 4 speed, A/C, and toolbox.

Don't let this one slip through your hands.

Results for Door ID Tag
VIN#: F26HRY86459
Series: F26 = F250 4x4 Pickup
Engine: H = 8 Cyl, 351, Now rebuilt 460
Assembly Plant: R =
San Jose, CA
Transmission: A  =
4 speed, Manual, New Process 435
Front Axle: J = 4.10 w/P.S.
Rear Axle: B4 = 4.10 Limited Slip, 5200lb Dana 60

SOLD $12,450.00


Return Home